- First Name
- Mark
- Joined
- May 28, 2021
- Threads
- 28
- Messages
- 1,285
- Reaction score
- 1,888
- Location
- Gilbert, AZ
- Website
- jackpucks.com
- Vehicles
- R1T Launch, R1S Canyon Red
- Thread starter
- #1
20" Wheels Specs:
Weight: 88 lbs (with tires mounted)
Size: 20x8.5,
Offset: +48mm
Bolt pattern: 5 x 5.5
Hub Bore: 64.1mm
Construction: 20" wheels are forged. 21" and 22" wheels are all cast.
Working with my aftermarket wheel manufacturer on some forged designs for the R1T. At present because of the +48mm offset and massive OEM calipers, there are no options available off the shelf, so a custom forged wheel is in the works (whatever design I desire, but off road style and in a bronze or gunmetal for me)......Interesting to note is a complete R1T 20/AT with Pirellis weighs in at 88lbs, which is light for a 275 (34" tall) off road AT tire and wheel.
Forged OEM wheels are made in China....
The amount of drop/suspension travel front and rear is quite high as noted by how much we had to keep pumping the floor jack up. The jack points on the R1T are under four little round plastic doors, which means you are required a small diameter 2.5" metal lift point for the jack. Love this truck!!!
Weight: 88 lbs (with tires mounted)
Size: 20x8.5,
Offset: +48mm
Bolt pattern: 5 x 5.5
Hub Bore: 64.1mm
Construction: 20" wheels are forged. 21" and 22" wheels are all cast.
Working with my aftermarket wheel manufacturer on some forged designs for the R1T. At present because of the +48mm offset and massive OEM calipers, there are no options available off the shelf, so a custom forged wheel is in the works (whatever design I desire, but off road style and in a bronze or gunmetal for me)......Interesting to note is a complete R1T 20/AT with Pirellis weighs in at 88lbs, which is light for a 275 (34" tall) off road AT tire and wheel.
Forged OEM wheels are made in China....
The amount of drop/suspension travel front and rear is quite high as noted by how much we had to keep pumping the floor jack up. The jack points on the R1T are under four little round plastic doors, which means you are required a small diameter 2.5" metal lift point for the jack. Love this truck!!!
Sponsored
Last edited: