SDH
Well-Known Member
Floor mats 100%. Also i got a vinyl-type bed liner (recommended on this Forum I think) so you can throw all sorts of crap in the bed with scratching the sh!t out of the actual bed.
Sponsored
Where to get the magnets?Second thing you need to do is start hunting for magnets in the Frunk. If you only have 1 shitty magnet, you need to return the R1T immediately.
Don't even ask what you need to do if you have the plastic trim piece instead of the wood trim piece behind the front headrests...
Oh - and definitely get the floor mats. You won't regret keeping those carpets fresh.
It's the special Dyslexic model.What's an RT1 though?
Welcome to the Charlotte area Rivian group! Get ready for 5 hour rides to service center in either Atlanta or Richmond, your choice, as both NC and SC currently ban Rivian having service centers in their states despite Tesla having multiple. Seriously, you'll enjoy having the R1T and taking it up into the mountains. A blast to drive.Got the email telling me to upload documents for my new RT1.
What suggestions do people have to be 'ready' ? Ordered the wall charger, that is shipping out today!!!
EXCITED..
Get the utility mats? Do some cycling, get the roof mounts? Lemme know what I should be thinking and prepping for?
Have a charger installed at my office building?
Share!!!
![]()
My post came with a dose of heavy sarcasm considering how upset "magnetgate" made some folks on this forum.That 1 shitty magnet actually does what it's supposed to do
We installed the crossbars on back of truck. Couldn't get the bikes to fit as they were too long. Moved bars to roof and mounted bikes. Went out for a ride. Very noisy up there as the bikes were just slamming into the wind. A little bit awkward getting the bikes up there even with one person balanced in doorway and on gear tunnel and other standing in bed of truck. Moved bars back to back of truck and mounted bike racks the farthest to the edge they could go. This works as the rim over the back of the cabin curves just enough the wheels now clear by about 2 inches. Much easier to load/unload on back of truck versus roof.
If I was going somewhere remote, not driving too fast, and had lots of other gear in back I would put bikes on roof. For more day to day use definitely in the back.
It's a trim of the Ford Mach-E. (California Route 1, Mach-E people abbreviate it either CR1 or RT1.)What's an RT1 though?
It's all good in the hood. However, you still haven't fixed your profile.Haha, pick on the new guy.. r1t
Welcome to the clan, Stan (John).done..thank you!
Get a hitch mount for the bikes (preferably a 1Up rack). Way more wind resistance up top and you won't notice any additional noise with a hitch mount rack.Got the email telling me to upload documents for my new RT1.
What suggestions do people have to be 'ready' ? Ordered the wall charger, that is shipping out today!!!
EXCITED..
Get the utility mats? Do some cycling, get the roof mounts? Lemme know what I should be thinking and prepping for?
Have a charger installed at my office building?
Share!!!
![]()
I had the mats and cross-bars in my configured reservation, but wound up choosing a Launch Edition from the R1 Shop that has neither accessory. My guide tells me that both now have to be ordered from the Gear Shop, and that they've lowered the pricing to match pre-March values. I don't yet have a delivery date for the R1S, so haven't placed a Gear Shop order (or even checked to see if my guide is correct about the pricing). Do I need to put that order in ASAP or are Gear Shop deliveries fairly timely?Get the floor mats, I installed them day 1 and it’s the best decision I made. IMO the R1T looks the most sporty with the roof mounts I also installed those day 1