CommodoreAmiga
Well-Known Member
They used to sell a higher power unit. The current ones max out at 48A, however.Isn't Tesla wall charger 48A? That's the same as Rivian's onboard charger
Sponsored
Announcing our new "CLUBS" section where you can join or create a Rivian club or group! You can use this new feature to conveniently plan and discuss local events, gatherings or other club/group related topics.
So we encourage you to join (or start) special-interest and regional-based Rivian clubs at: https://www.rivianforums.com/forum/group-categories/clubs-groups.1/
They used to sell a higher power unit. The current ones max out at 48A, however.Isn't Tesla wall charger 48A? That's the same as Rivian's onboard charger
Correct, Gen 3 I think dropped to 48, I still have the higher power gen 2 unit.They used to sell a higher power unit. The current ones max out at 48A, however.
Just checked, that is indeed what it is set to. My memory just rounded it. :-DYou should set load sharing to 48A. A 60A breaker should be derated to 80% to insure you don’t risk an overload of the circuit.
It's the Gen 1 that can do 80A, the Gen 2 dropped to 48A. Tesla also hasn't sold a vehicle capable of 80A charging over AC in many years. I would assume the Cybertruck will bring back 80A.Correct, Gen 3 I think dropped to 48, I still have the higher power gen 2 unit.
Edit : The Gen 2 Tesla HPWC can do up to 80A
Here is the guide for the Gen1 HPWC (https://www.tesla.com/sites/default...l-connector-installation-installation-a-b.pdf) - pg6 - Max 80AIt's the Gen 1 that can do 80A, the Gen 2 dropped to 48A. Tesla also hasn't sold a vehicle capable of 80A charging over AC in many years. I would assume the Cybertruck will bring back 80A.
No way, there is no way they'd eliminate AC charging at home over night, it's the best type for long life of the pack.Cybetruck will be DC only.
EV batteries are always charged by DC. The conversion from AC takes place in the vehicle when using an EVSE (L1 or L2), while when DC charging the equipment converts from AC before feeding it to the vehicle.No way, there is no way they'd eliminate AC charging at home over night, it's the best type for long life of the pack.
I was joking mostly. TBH, I'm surprised it took this long for someone to note how crazy that was to say. lol.No way, there is no way they'd eliminate AC charging at home over night, it's the best type for long life of the pack.
It's definitely coming out at $39k in 2022. For sure.
Probably at the same time I get my LE R1S. ?It's definitely coming out at $39k in 2022. For sure.
All - 48A breaker pushing out 40 amps 200 volts can still be plugged in and will charge one of these monsters pretty much over night. Are you really ever going to need more than that?Probably at the same time I get my LE R1S. ?
No, no, no. Several EVSE are equipped with a NEMA 14-50P plug and are rated at 40A max charging rate. Such a unit MUST be plugged into a 14-50R receptacle wired to a 50 Amp. breaker using conductors rated for 50 Amps. Because of a weird exception in the NEC there are 14-50R receptacles wired to 40 Amp breakers. EVSE plugged into such an outlet must not charge at more than 32A and in order to be safe several manufacturers (Tesla and Rivian for example) limit the current their 14-50P equipped EVSE can deliver to 32 A.All - 48A breaker pushing out 40 amps 200 volts can still be plugged in and will charge one of these monsters pretty much over night. Are you really ever going to need more than that?
I spent a bunch of time looking into this, and it seemed like the most logical solution.
There is a bit more to it than that. The wire must be THN, THWN, SE... (i.e. rated 75 °C) and not NM-B or UF-B (60 °C) in order to use a 60A breaker with it and charge at 48A. The fact that your house has a 50 A breaker protecting this wire suggests it is not rated 75 °C. Unless you can verify that the wire is rated 75 °C you will have to stick with the 50A breaker and charge at 40A max.I had a dedicated line run for my EVSE and it partially is re-using a prior electrical run for a hot tub by the previous owner of my house. The wire is actually #6 wire so I could technically run at 48A with a breaker change from 50A to 60A but I will leave it because I think the 40A will be sufficient.