Roomy Access not restoring post .38.0

[atebit]

With Roomy Access enabled, my seat moves to the Comfy Access position when I park the truck. But since the update, the seat fails to return to driving position the next time I get in & hit the brake probably about 75% of the time.

Anyone else?

Sponsored

 

[Rknb2000]

With Comfy Access enabled, my seat moves to the Comfy Access position when I park the truck. But since the update, the seat fails to return to driving position the next time I get in & hit the brake probably about 75% of the time.

Anyone else?

I have noticed if you unlock your vehicle with the key Fob it won’t recognize my setting. It only works with my phone as a key, in my case.

 

[racekarl]

I have noticed if you unlock your vehicle with the key Fob it won’t recognize my setting. It only works with my phone as a key, in my case.

That at least may be working as expected if the fob is not assigned to your driver profile.

 

[Rknb2000]

The Fob is assigned, but works when it wants to.

 

[AlexF]

If you push a steering wheel button before or during the seat movement back to your normal position it will stop the process and then won’t allow you to restore it back to your normal position.

Seems like a SW issue with an interrupt routine

 

[gsqrd]

Exactly the same circumstances and behavior. R1S

 

[SANZC02]

We have two fobs, both assigned to different drivers, neither adjust the seat when they are used. We do not have easy access set but if my wife drives the next time I drive with PAAK, the seat adjust to my position when I open the drivers door.

 

[atebit]

I have noticed if you unlock your vehicle with the key Fob it won’t recognize my setting. It only works with my phone as a key, in my case.

I’m exclusively PaaK, should’ve mentioned that.

 

[jfornelli]

I'm having this same issue in my R1S. Since the last update, sometimes it works, sometimes it doesn't.

 

[Firstlast]

Same behavior since latest update. Comfort access and proximity unlock have been 70% reliable

 

[TheIglu]

Same experience. Kinda frustrating.

Though generally, I always do a full reboot after software updates or I see issues like this. Haven't done so yet, but will next time I drive and I'll report back if it helped.

Generally speaking, the Comfy Access isn't very reliable if you walk up to an unlocked (while at home) truck that's been sleeping and open the door/jump in. I usually have to tell it to restore my settings in that situation. It's like the system needs time to wake up before it'll properly activate the "return to driving position" command when the brake is pushed.

 

[Riviot]

Anyone else?

Yes! I thought I was getting shorter. Exclusively fob use. It reset a few other settings like wipers and drive mode too, really bugs me that it inconsistently changes defaults or fails to restore fully after an update.

 

[JonClimbs]

Same behavior since latest update. Comfort access and proximity unlock have been 70% reliable

Same! I'm PaaK only.

Sponsored