ATV transporting in R1T bed

[Lsthrz]

Can Am Outlander
L x W: 94 x 48; Wheelbase: 51in

R1T bed (tailgate down)
L x W: ~83 x ~50

Sponsored

 

[crashmtb]

Can Am Outlander
L x W: 94 x 48

R1T bed (tailgate down)
L x W: ~83 x ~50

The overall length minus half a wheel/tire diameter would be the more important dimension. That ought to be less than 83”.

edit: presuming stock 26” tires, that’s 81” long. A tight fit.

 

[Lsthrz]

The overall length minus half a wheel/tire diameter would be the more important dimension. That ought to be less than 83”.

edit: presuming stock 26” tires, that’s 81” long. A tight fit.

Should be fine with tailgate down. I’ll know soon.

 

[lostpacket]

Have y'all seen any electric ATVs that have caught your interest?

 

[Monkey]

I'd like to fit my Honda Rancher or Rincon in the back of an R1T. Tailgate holding 1000lbs should make this no big deal. Hopefully I'll get to see some of you guys doing it before my max pack shows up.

 

[kylealden]

Can’t find it right now but someone on IG had a motorcycle in the back with a folding ramp in the gear tunnel. The bed should be more than capable if you can find a ramp situation that you’re comfortable with.

 

[Lsthrz]

Have y'all seen any electric ATVs that have caught your interest?

I like Polaris’ electric UTV but there many out there and more on the way. It’s hard to keep up

Sponsored