Jeevesbond
Well-Known Member
- Thread starter
- #1
Ive seen different posts. Do current r1s have dash 12 v plugs? I power a radar detector through one and so have a use for it. Also is the frunk one gone? Thanks
Sponsored
Announcing our new "CLUBS" section where you can join or create a Rivian club or group! You can use this new feature to conveniently plan and discuss local events, gatherings or other club/group related topics.
So we encourage you to join (or start) special-interest and regional-based Rivian clubs at: https://www.rivianforums.com/forum/group-categories/clubs-groups.1/
Tap into the mirror using this https://www.amazon.com/gp/aw/d/B082V1245P?psc=1&ref=ppx_pop_mob_b_asin_titleYikes. How are people powering a simple thing like a radar detector (v one or uniden r7 that is not permanent but move around)
Yep. I just bought one of THESE for less than $13, and now I have a 12V outlet under the dash. (Not neatly mounted like WattTruckMatt's frunk outlet, but maybe that's next. Or maybe I'll just leave it stuffed behind the dash. At least I now have options...)The OBD port also has power.
I have the opposite, I have a dash 12v but not the frunk 12vYes, both are gone. I got a transition truck in March (Feb 2023 build) that has the frunk 12v, but not one in the dash/center console. Really annoying.
https://www.amazon.com/dp/B08SGC4K9T?psc=1&ref=ppx_yo2ov_dt_b_product_detailsIs there an obd option for radar detector? If not any other option rather rhan hardwirw. Im fearful ill knock mirror off after reading thread on hardwire
Thanks i ended up hardwiring. Actually was easy thanks for help from forum. Went super well except how hard i had to pull on trim coverhttps://www.amazon.com/dp/B08SGC4K9T?psc=1&ref=ppx_yo2ov_dt_b_product_details
Bought this instead of the 12v cig adapter. The USB would fit nicely underneath the steering wheel. You can hide the wire inside the panel underneath.
You hardwired a 12v plug in under the dash? How? What forum post(s) or video(s) did you look at to do it? I'm very much interested in doing this as well.Thanks i ended up hardwiring. Actually was easy thanks for help from forum. Went super well except how hard i had to pull on trim cover