pangpang77
Well-Known Member
- First Name
- Dan
- Joined
- Feb 22, 2022
- Threads
- 20
- Messages
- 172
- Reaction score
- 313
- Location
- New Jersey
- Vehicles
- 2022 Hyundai Ioniq 5, 2023 Chevy Bolt EUV Premier
- Occupation
- Systems Exec
- Thread starter
- #1
Hi All,
It's been over two years and I finally got my delivery last week. I had plenty of time to lurk around this forum as I waited for the car and there were a few things I knew I wanted to address for my build based on everyone's feedback.
1) I knew I wanted the chrome-delete look.
i. So I went to Static Coatings of Clifton, NJ to powder-coat my 21s in glossy black - https://www.staticcoatings.com/
ii. I bought 4 center caps with yellow emblems from Abstract Ocean, but since they were dark gray, I had to spray paint them glossy black on the outside, and then I used permanent markers to fill out the inside of the yellow emblems - https://abstractocean.com/products/wheel-center-caps-for-r1t-r1s
iii. Bought the black emblems with yellow accents from Abstract Ocean - https://abstractocean.com/products/satin-black-emblems-for-rivian-r1s?variant=42381442547885
iv. Got the chrome delete for the silver strip along the roof of the car from TWraps in Gloss Black - https://www.amazon.com/TWRAPS-Chrome-Delete-Rivian-Glossy/dp/B0BRXQ2KJR/ref=sr_1_7?crid=101GFPAT5IPH6&keywords=twraps+rivian&qid=1700864951&sprefix=twraps+rivian,aps,78&sr=8-7&th=1
v. Bought the front bumper chrome delete set from Brain Exploder - https://www.brainexplodermerch.com/product-page/front-bumper-silver-chrome-delete-rivian-r1t-r1s
vi. Plastidipped the back bumper silver since Brain Exploder only had the chrome delete decals for R1T
vii. Bought some Rivian yellow matching plastic tire valve caps - https://www.amazon.com/gp/product/B0CCXQ9V8Q/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
2) This is my wife's daily driver so I knew CarPlay was a non-negotiable. She's very much a plug-n-play can't make it too complicated for her. I also saw how even though there is drive cam, it looks like the front and rear camera resolutions are not good enough to note the opposing car license plates. So:
i. I found a CarPlay screen/2.5K front 1080p rear dash cam combo from Ottocast. It's a company I've used in the past. I've subsequently replaced it with a much better and elegant solution in the EV Sportline CarPlay Device (replaced 12/24/2023) https://www.rivianforums.com/forum/...e-carplay-display-hidden-wires-install.22622/
ii. Also wanted dash mount solution for the iPhone - https://www.amazon.com/gp/product/B0C4M1BGCX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
iii. Also got a mag charging mount that lifts the iPhone high enough above the steering wheel - https://www.amazon.com/gp/product/B0C23PQK9Z/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
iv. Needed a way to power both the CarPlay screen / dash-cam combo and magsafe phone charger. I had originally ordered the Scosche OBD-ii USB solution, but realized it doesn't have a shut-off option, so it would stay on with the dedicated power. I was worried about draining the 12v battery needlessly, so I ordered a Garmin OBD - USB adapter which has a 10 minute shut-down after the car sleeps. It does take about 30 minutes after the car locks to engage (probably because it takes a good 20 minutes for the car to really go to sleep). The only issue is that when I charge the car, it doesn't go to sleep so the screen stays on. I am looking to do a fuse tap to see if it works better. But for now it's working pretty well - https://www.amazon.com/gp/product/B094Y3KNFJ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1
3) I realized there were only two cuplholders up front, so got a tray from BestEVMod to add two cupholders - https://www.amazon.com/gp/product/B0C6GGMH9Z/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&th=1
4) I purchased the Maxpider 3D weather mats for all three rows and the trunk area - https://www.amazon.com/gp/product/B0C8X8ZPY3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
5) I didn't like the reviews on the frunk mat from Maxpider 3D as there's no cutout for the net. So I got the frunk dual mat from BestEvMod - https://www.amazon.com/gp/product/B0BRQ2C16L/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&th=1
6) Bought the Samsung T7 1TB and installed it for the Drive cam recording - https://www.amazon.com/gp/your-acco...8&ij=&opt=ab&ref_=&search=113-1474462-3723462
I think that will be it for now. But I'm pretty happy with it now.
7) 12/1 Added center console tray from BestEVMod
https://www.amazon.com/BestEvMod-Rivian-R1T-R1S-Accessories/dp/B0BP7NC5WJ/ref=sr_1_3?crid=2BQ3Q1ISN27UW&keywords=center+console+tray+r1s+bestevmod&qid=1702088180&sprefix=center+console+tray+r1s+bestevmod,aps,67&sr=8-3&th=1
8) 12/5 Added Vantrue 3N Pro 4K Triple Dash Cam
https://www.amazon.com/Vantrue-N4-Pro-Channel-STARVIS/dp/B0C3M7HPRT/ref=sr_1_1_sspa?crid=2THUVLCY97AEJ&keywords=vantrue+n4+pro&qid=1702088282&sprefix=vantrue+n4+pro,aps,108&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1
9) Added additional 2nd row dual cup-holders DIY Mod
https://www.rivianforums.com/forum/...dual-cupholder-added-to-center-console.22184/
10) Added TWRAPS Mud Guards
11) Added 3D Maxpider Seatback mats
12) Added Aluminum License Plate Holder
It's been over two years and I finally got my delivery last week. I had plenty of time to lurk around this forum as I waited for the car and there were a few things I knew I wanted to address for my build based on everyone's feedback.
1) I knew I wanted the chrome-delete look.
i. So I went to Static Coatings of Clifton, NJ to powder-coat my 21s in glossy black - https://www.staticcoatings.com/
ii. I bought 4 center caps with yellow emblems from Abstract Ocean, but since they were dark gray, I had to spray paint them glossy black on the outside, and then I used permanent markers to fill out the inside of the yellow emblems - https://abstractocean.com/products/wheel-center-caps-for-r1t-r1s
iii. Bought the black emblems with yellow accents from Abstract Ocean - https://abstractocean.com/products/satin-black-emblems-for-rivian-r1s?variant=42381442547885
iv. Got the chrome delete for the silver strip along the roof of the car from TWraps in Gloss Black - https://www.amazon.com/TWRAPS-Chrome-Delete-Rivian-Glossy/dp/B0BRXQ2KJR/ref=sr_1_7?crid=101GFPAT5IPH6&keywords=twraps+rivian&qid=1700864951&sprefix=twraps+rivian,aps,78&sr=8-7&th=1
v. Bought the front bumper chrome delete set from Brain Exploder - https://www.brainexplodermerch.com/product-page/front-bumper-silver-chrome-delete-rivian-r1t-r1s
vi. Plastidipped the back bumper silver since Brain Exploder only had the chrome delete decals for R1T
vii. Bought some Rivian yellow matching plastic tire valve caps - https://www.amazon.com/gp/product/B0CCXQ9V8Q/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
2) This is my wife's daily driver so I knew CarPlay was a non-negotiable. She's very much a plug-n-play can't make it too complicated for her. I also saw how even though there is drive cam, it looks like the front and rear camera resolutions are not good enough to note the opposing car license plates. So:
i. I found a CarPlay screen/2.5K front 1080p rear dash cam combo from Ottocast. It's a company I've used in the past. I've subsequently replaced it with a much better and elegant solution in the EV Sportline CarPlay Device (replaced 12/24/2023) https://www.rivianforums.com/forum/...e-carplay-display-hidden-wires-install.22622/
ii. Also wanted dash mount solution for the iPhone - https://www.amazon.com/gp/product/B0C4M1BGCX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
iii. Also got a mag charging mount that lifts the iPhone high enough above the steering wheel - https://www.amazon.com/gp/product/B0C23PQK9Z/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
iv. Needed a way to power both the CarPlay screen / dash-cam combo and magsafe phone charger. I had originally ordered the Scosche OBD-ii USB solution, but realized it doesn't have a shut-off option, so it would stay on with the dedicated power. I was worried about draining the 12v battery needlessly, so I ordered a Garmin OBD - USB adapter which has a 10 minute shut-down after the car sleeps. It does take about 30 minutes after the car locks to engage (probably because it takes a good 20 minutes for the car to really go to sleep). The only issue is that when I charge the car, it doesn't go to sleep so the screen stays on. I am looking to do a fuse tap to see if it works better. But for now it's working pretty well - https://www.amazon.com/gp/product/B094Y3KNFJ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1
3) I realized there were only two cuplholders up front, so got a tray from BestEVMod to add two cupholders - https://www.amazon.com/gp/product/B0C6GGMH9Z/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&th=1
4) I purchased the Maxpider 3D weather mats for all three rows and the trunk area - https://www.amazon.com/gp/product/B0C8X8ZPY3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
5) I didn't like the reviews on the frunk mat from Maxpider 3D as there's no cutout for the net. So I got the frunk dual mat from BestEvMod - https://www.amazon.com/gp/product/B0BRQ2C16L/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&th=1
6) Bought the Samsung T7 1TB and installed it for the Drive cam recording - https://www.amazon.com/gp/your-acco...8&ij=&opt=ab&ref_=&search=113-1474462-3723462
I think that will be it for now. But I'm pretty happy with it now.
7) 12/1 Added center console tray from BestEVMod
https://www.amazon.com/BestEvMod-Rivian-R1T-R1S-Accessories/dp/B0BP7NC5WJ/ref=sr_1_3?crid=2BQ3Q1ISN27UW&keywords=center+console+tray+r1s+bestevmod&qid=1702088180&sprefix=center+console+tray+r1s+bestevmod,aps,67&sr=8-3&th=1
8) 12/5 Added Vantrue 3N Pro 4K Triple Dash Cam
https://www.amazon.com/Vantrue-N4-Pro-Channel-STARVIS/dp/B0C3M7HPRT/ref=sr_1_1_sspa?crid=2THUVLCY97AEJ&keywords=vantrue+n4+pro&qid=1702088282&sprefix=vantrue+n4+pro,aps,108&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1
9) Added additional 2nd row dual cup-holders DIY Mod
https://www.rivianforums.com/forum/...dual-cupholder-added-to-center-console.22184/
10) Added TWRAPS Mud Guards
11) Added 3D Maxpider Seatback mats
12) Added Aluminum License Plate Holder
Sponsored
Last edited: