tiltedandsaltyaf
Well-Known Member
drywall work required, a lot easier to go in from the bottomThere's a nice cutout in the rear of the EVSE... I don't understand why more people aren't using it!
Sponsored
Announcing our new "CLUBS" section where you can join or create a Rivian club or group! You can use this new feature to conveniently plan and discuss local events, gatherings or other club/group related topics.
So we encourage you to join (or start) special-interest and regional-based Rivian clubs at: https://www.rivianforums.com/forum/group-categories/clubs-groups.1/
drywall work required, a lot easier to go in from the bottomThere's a nice cutout in the rear of the EVSE... I don't understand why more people aren't using it!
Pic OP posted shows a LB conduit body. It's unlikely any drywall work would have been required to fish it the extra ~2 feet higher.drywall work required, a lot easier to go in from the bottom
This touches on a sometimes overlooked electrical code violation by DIY. For future reference for those doing an install, it's a violation of NEC to install a junction box, condulet, etc. in the wall and cover it up with drywall or other building material. You need to use the appropriate 90 degree fitting if the wall is enclosing the fitting, or install a flush mount junction/pull box. You don't want the inspector (if actually being done, lol) forcing you to rip the wall apart to remedy it if he/she sees a condulet coming in the back of the enclosure. The only exception to this that I am aware of is drop ceilings, as the panels are readily removable. It's generally OK to have boxes/condulets above a drop ceiling.Pic OP posted shows a LB conduit body. It's unlikely any drywall work would have been required to fish it the extra ~2 feet higher.
Edit: I guess OP has a firebreak in that exact spot. Unfortunate. My point stands, however... I've seen a lot of Rivian EVSE installations with external conduit that appears unnecessary. This case may have been necessary, but I'm sure many of the others were not.
Yes, fair points. I ran conduit to a 4" box mounted behind my EVSE, then marked and drilled a flat cover and used a chase nipple to transition into the EVSE. The inspector liked it.This touches on a sometimes overlooked electrical code violation by DIY. For future reference for those doing an install, it's a violation of NEC to install a junction box, condulet, etc. in the wall and cover it up with drywall or other building material. You need to use the appropriate 90 degree fitting if the wall is enclosing the fitting, or install a flush mount junction/pull box. You don't want the inspector (if actually being done, lol) forcing you to rip the wall apart to remedy it if he/she sees a condulet coming in the back of the enclosure. The only exception to this that I am aware of is drop ceilings, as the panels are readily removable. It's generally OK to have boxes/condulets above a drop ceiling.
That's a great idea, and it actually fits with another implied exception in the code. A permanent light fixture that is being supplied power can cover the junction box. A strict interpretation might be that the light fixture, or in your case the EVSE, violates "without removing any part of the building or structure." If it is a permanent light fixture, is it part of the building? Fortunately, common sense prevails with respect to this!Yes, fair points. I ran conduit to a 4" box mounted behind my EVSE, then marked and drilled a flat cover and used a chase nipple to transition into the EVSE. The inspector liked it.