Sponsored

Search results

  1. Half Shaft / CV Joint Noise

    Seems like Rivian needs a new half-shaft. I got my half shafts replaced due to this 2 times already, last time in March or 5000 miles ago now this clunking sound is back again, exactly the same
  2. RealWheels EV Stainless Steel Running Boards

    I'm fully happy with them, will probably modify them a bit further to make them sit higher if RealWheelsEV won't be able to develop new brackets. Cutting panels is not something crazy, all running boards on the market are required either to remove or cut panels if you want to keep them. Take...
  3. RealWheels EV Stainless Steel Running Boards

    I just looked at the pictures in 1st message in this thread and I wonder if any changes were made to the brackets since on those pictures boards are sitting much closer to the plastic trims.
  4. RealWheels EV Stainless Steel Running Boards

    Got my boards last Tuesday and finished installation yesterday. Packaged very well. Amazing box, supports, etc, just fully happy with it. Great instruction. The team was very helpful and responsive over emails. Also fully aligned with the expectations they set regarding lead time. It took me...
  5. New "Bolt-in" Flip-out Bed Extender for Rivian R1T -- NO Drilling, NO Screws into bedliner...pure BOLT ON! EV Sportline

    If the bed extender is attached (with factory tonneau cover) can I still get access to the storage on the bottom of the bed or do I need to take it off? Seems like on the video (great one tho), it needs to be removed to open that compartment.
  6. Steering wheel slowly drops down and needs to be recalibrated often

    Oh, I thought I’m crazy. Same issue here, but also do have this issue with seat. Calibrate every 3-5 days
  7. Anyone running Goodyear Wrangler TrailRunner AT?

    After additional consideration and research, I pulled the trigger on these tires. So far extremely happy. Smooth and quiet. Also now I can run 55 psi (probably will set it to 60 psi later) since these are rated up to 80 psi cold. Additionally, these are 53lbs each which is almost the same as...
  8. RealWheels EV Stainless Steel Running Boards

    Thank you for replying back. My point is not to use those jacking points since it takes a lot of time to pop out those plastic caps, then point adapter, etc. I want to be able just to approach the truck with my floor jack and lift it in 2 seconds. Also, I need to lift the whole side at once...
  9. Texas WTB R1T running boards

    Hi all, If you have a set of used running boards for R1T you don't need anymore (sold the car, etc) I would consider buying them from you. Preferably the DFW area, but will be traveling if the price is right.
  10. Introducing RMaxx Running Boards & Rock Sliders for Rivian R1T / R1S from Team 1EV

    Sorry idk if it's been asked already, don't want to go thru 160 pages, but is there any option to make running boards with a middle point strong enough to jack the truck? I don't need rock sliders, but don't want to get just running boards since I can't jack truck using it
  11. RealWheels EV Stainless Steel Running Boards

    Good product, but I wish someone would make the running boards with a middle point strong enough to jack the truck. I don't want to get rock sliders since they are way too heavy and I don't really offroad, but I want to be able to jack one side of the truck from the running board :) Is it...
  12. Avoid tolls options for Maps?

    After entering a destination, you'll see a new “Trip preferences” option near the “Start navigation” button. You can now select your preferred arrival range and charging networks, in addition to the pre-existing “Avoid” options for highways, tolls, and ferries.
  13. Anyone running Goodyear Wrangler TrailRunner AT?

    Hi all, My OEM 20" AT tires are at the end of their life after 33k miles and I'm researching the options we have. After a few days of research, the Goodyear Wrangler TrailRunner AT got my attention. There are a lot of other truck guys who run them and seems like they are happy with them...
  14. Seat and steering column adjustments Interrupted by scroll thumbs

    Thank you for replying! :) Yeah, I honestly noticed it right after OTA but have never paid too much attention to it, but lately, it started to be annoying for some reason. Thank you!
  15. Seat and steering column adjustments Interrupted by scroll thumbs

    Hi All, Ever since the OTA update that granted us the ability to open and close the garage door using the right button on the steering wheel, I've observed an issue. If I hop into the truck, engage the brake, and begin driving while the seat and steering column are still adjusting to their...
  16. Garage Fit R1T (Dallas Area)

    You're welcome, hope to see your new Rivian around soon :)
  17. Garage Fit R1T (Dallas Area)

    Not really shocking :) I do understand people who don't use it xD I'm not in that area but my office is in West Plano and I'll be there tomorrow anyway, maybe even late tonight (but not sure). Send me a PM, and I'll share my phone # and we can sync
  18. Garage Fit R1T (Dallas Area)

    There is a North Texas Rivian group on FB and I bet a few people living around McKinney that can help. If nobody is available I can swing by tomorrow to do a quick test :)
  19. Washington GC Washer Fluid Group Buy - IT'S ON

    Sorry, I have moved out of Seattle since it was discussed and I won't be able to take it from you. It also not raining here and I forgot how to use my windshield wipers ? But I'm glad it is still happening! :)





Top