Search results

Photos of all screens…

Had mine installed since 8/23. They’ve experienced a CO winter. Sliders have been great, no rust or any other issues.

Had truck since May 2022. The original powered tonneau always worked flawless for me, and I used it quite frequently in those almost 2 yrs. Had the truck at the SC for something recently not related, and while it was there they replaced the tonneau with the updated version. New one runs slightly...

In case you’re interested, here’s the original thread from when they were designed… https://www.rivianforums.com/forum/threads/jebinc’s-bitchin’-no-rails-tie-downs-mod.13585/

To be fair, there’s much less chance than a traditional truck that if something does go wrong, you have a chance of fixing yourself roadside. So I just have this small ratchet set tucked away rather than carrying larger bags of tools around… https://www.amazon.com/gp/aw/d/B00I8MYMT2

It’s bull. I had my insurance increased at 6m, then at 12m, so I asked them about the driver+ discount. They said that they missed some kind of a deadline to present the plan to use driver+ data to whatever governs insurance (can’t remember their exact wording), so we’re unable to offer driver+...

Thanks @RWerksman! I had some fitment issues with the left side mount whereby the back would not fully slot into place but that could be due to variances in the truck or whatever the STL was optimized for (I printed using Polymaker ABS on an X1C using Bambu Studio stock profiles). But man that...

https://www.cars.com/articles/rivian-recalls-2022-r1s-r1t-for-improperly-deploying-airbags-463188/

As already mentioned in a couple of responses by others the front/side/rear cameras are 1376x976, but due to the fisheye distortion theres only about 1245x665 for front, 1270x850 for side, and 1270x850 for rear useful (very rough measurement of image as is, not undistorting the fisheye)...

As usual, your designs look great! The video mentions STL's available but I don't see them on printables - are you till planning on open sourcing them?

Works for me using Nexx as the integration.

I use an Ecoflow Wave 2 in a similar setup. it only needs 1 outlet though piping into the tent for either heating or cooling.

https://www.rivianforums.com/forum/threads/update-2023-26-00-new-features-improvements-and-bug-fixes.17020/post-365687

Over the past week I’ve had this happen 3 times to my May 2022 T when using my Rivian wall charger at home, as well as charger feeling very warm. I raised a service ticket. They came back saying it was a known issue with 2023.22.0 affecting a very small number of owners. There will be an update...

I’ve had my liner installed a while now. Today I picked up a pallet of tiles weighing about 1500 lbs. my first thought after the fork lift truck had loaded it in, followed by nudging it in another few inch, was ‘oh shit… I should have removed the liner’. Happy to report that the liner held up...

I hear what you're saying about the headwind, but looking at the weather forecast for that day it was a steady 5mph N / NE wind with 12mph gusts for the entirety of that journey, and I was traveling SW. Yep that makes sense in driving the 15 min average down, but the realtime values were also...

Was 90 degrees outside. Had the air con set to 71 both before, during, and after charging. No significant change in elevation. I guess this is down to post charging battery management. That’s a significant hit if that’s the case.

Noticed this for the first time today as had the efficiency graph showing… Was traveling at 80mph in conserve for about 50 miles achieving approx 2.2kwh. Had map set to stop at an Electrify America charger just off the highway so battery was preconditioned. Charged from 15 SoC to 50 then...

I’ve had a Rugged Road 65 for 18 months. It’s been great. No complaints. Tempted to get the 45 too now I see it fits in the trunk.

I’ve never removed mine when going through a car wash and not had any issues. Didn’t even know that was recommended.