Yes, that's the vendor OUI for the manufacturer of the wifi adapter being used by Rivian. Coincidentally, my EA home charger uses the same vendor. The traffic from the truck isn't really interesting as it's all TLS encrypted https. Most of the data is sent to a host named something like...
I've used various tools, primarily I was monitoring the mac address table in my switch to see if it was active on the network and if so I would check an ntopng instance I have installed on my router to see what hosts it was sending data to and how much data it was sending.
I'm not sure I would go so far as hypothesis but it may be the rather narrow opening for loop going into the latch causing interference or additional pressure on the latch. Honestly I had zero expectations when I took the trim piece off in the first place and really only initially took it off...
Similar post is buried in one of the numerous vampire drain threads but it was suggested that this may merit a fresh thread so here goes...
I, like many have experienced pretty nasty vampire drain on my truck since taking delivery at the end of November. Initially I didn't think much of it and...
I drove it for two weeks with the trim piece removed with no visible change in hood deflection at speed and the frunk latched/unlatched as normal. As far as I can tell this trim piece doesn't come in contact with the sheetmetal on the underside of the hood. My theory is that the opening for...
Happy to weigh in on a new thread or be the thread starter with pics. I haven't tracked mine as closely in the last week and put the trim piece back in yesterday as I dropped off at the SC this morning. I can definitively say that I had significantly less drain with the piece removed than with...
Happy to ask the SC if it's even a possibility when I drop off on Tuesday (assuming you're talking about Richmond since your profile says VA). I've only had one conversation with them but they've been great so far.
Resets don't do anything for me either. I suspect it's related to heat for me as two times it has happened with stop and go traffic on longish drives. When it happened last week it was after only about 40 minutes tho so I'm afraid it's getting worse. My biggest concern is that they won't be...
I've had this happen three times but each time it has cleared after it has sat for 30 minutes or so. In my case it doesn't have to sleep as one of the occurrences cleared while I sat in the truck. In my case I also lose the ability to hold and the truck will go into park and kneel when I come...
The long piece of plastic sitting across the frunk is the trim piece I removed. In the picture it is turned upside down. The now uncovered front area of the frunk is where the trim is usually installed. There are five clips equally spaced on the underside of the trim that hold the trim onto...
5 clips and a tab on either side that slide under the side trim. The easiest way to remove is to unclip each side first then the middle clip and then the two remaining. The piece is thin and flexible so can pulled out easily.
Yes, I've been waking it to make sure I'm not getting stale mileage readings though. I think I stated in one of my posts last night that it is now definitely going into a deeper sleep mode than before as the wake function was timing out and would take 2-3 attempts to get it awake and to the...
I lost a single mile of range overnight with the trim piece removed and I'm ready to declare victory. Now I just need to decide how to explain all this to rivian without them treating me like a crackpot.
It's getting stranger and stranger... I've now gotten back 3 of the 4 miles I lost with the trim inserted. I wouldn't believe this was happening if I weren't experiencing it myself. I think the system is giving predicted values of the battery based on current draw and once I remove the trim...
Update: after 9 hours of losing no charge, I decided to put the trim back on just to make sure I wasn't losing my mind. I lost 4 miles of range and a percentage of charge within only an hour! So the trim is now back off and I will check again in the morning. Something very odd has occurred...
I have been losing anywhere from 4-7% per day and last night lost 3% in a 12 hour period. This is with PAAK turned off at home, climate powered off, bluetooth turned off on my phone. So I finally decided it wasn't any wireless connectivity issue and started exploring other possibilities. I'm...
Received my range industries crossbars this week and had some time yesterday to put everything together. I'm super happy with the range industries crossbars. While they will take more time to take off and put on, there is no comparison between the factory crossbars and the range industries...
Here you go:
stl file is here:
https://www.thingiverse.com/thing:5881135
I used these magnets, they are slightly deeper than the pocket in the bottom of the cup holder:
https://www.amazon.com/dp/B08YYNFQ41?psc=1&ref=ppx_yo2ov_dt_b_product_details
A 32 oz. hydroflask fits perfectly and a 32...