AltaTruck
Well-Known Member
- First Name
- Al
- Joined
- Nov 8, 2020
- Threads
- 2
- Messages
- 246
- Reaction score
- 480
- Location
- Pittsburgh
- Vehicles
- Mazda RX8, R1T, Alta EXR (road) , Alta EXR (woods)
- Occupation
- Retired Science teacher
- Thread starter
- #1
Tuesday night I decided to go to the factory as I could not get some questions answered over the phone/email. I decided to ride my Guzzi out since the weather looked good. When I left there was still a little snow on the driveway from our recent 9" snowfall, but the roads were clear. Temperatures warmed during the day and I arrived about 5pm. I went in and explained what I wanted to get done and they said they would have a customer service rep call me. I had the put notes in my account describing I would be returning to Pittsburgh the next morning. I then went outside and road the perimeter road past the lot of finished vehicles. There must be close to a thousand - it's a lot !!!
One of my questions was the LG color. I was able to get close to one and photographed it in direct sunlight. The metalflake they used ia a gold instead of silver and gave it an Army OD color which is not to my taste.
I then was able to compare the el Cap under the same lighting.
I then moved onto the FG with the same technique.
I decided to change my configuration to Forest Green. Very sharp in full sun.
One of my questions was the LG color. I was able to get close to one and photographed it in direct sunlight. The metalflake they used ia a gold instead of silver and gave it an Army OD color which is not to my taste.
I then was able to compare the el Cap under the same lighting.
I then moved onto the FG with the same technique.
I decided to change my configuration to Forest Green. Very sharp in full sun.
Sponsored