Rivian R2D2
Member
Uber, its a lot less expensive than $99 a month and way less than a $1000 note.
Sponsored
The bass was okay, I listened to subtronics and Childish Gambino. Bass wasn’t incredible, but it wasn’t flat at all. It was good. The mid-channels genuinely sounded in-tuned. It was weirdly flat. The high channels were very vibrant. I should also caveat that one of the drivers before me could have tuned it. I didn’t touch the EQ and I didn’t look at it. Like I said I was focused on driving. I dabble in high quality audio equipment, but I’m no sound engineer. To some it may sound perfect, to others it may not. It just dependsAudio reviews have been interesting. I think I saw one that said everything was perfect except zero bass and it need an aftermarket subwoofer. Hard to know what to believe anymore on the audio.![]()
The R1 seems to mostly comply with the NEMA standard for bi-directional DC VT"x" connections.What is there is well executed. That said, there’s a lot of room for improvement.
5/ I‘m not impressed with the spate of information I’ve found so far on the V2H/G bidirectional charging capability of the R2. I understand from Volvo, that the EX60 supports/is compatible with the Enphase bIdirectional charger. Rivian‘s bidirectional charging capability built in to the R2 cannot be proprietary like I’ve been told Tesla’s capability is. That'd be disappointingly substandard. It wouldn’t differentiate the R2.
THANK YOU, YOU'RE THE BEST!! Your post is quite helpful and hopeful!!!The R1 seems to mostly comply with the NEMA standard for bi-directional DC VT"x" connections.
You are correct that Rivian has not been very clear regarding the direction, but I would be very surprised if they didn't fully embrace the NEMA standard when the bi-directional VTX is released, supposedly sometime this year. There are people already using the capability with their R1 trucks.
I would be equally surprised if the R2 does not follow the NEMA standard.
For the AC interface, it may be a different story. And it would be helpful, as you said, for Rivian to explain this to us. It is reasonable to assume Rivian will continue down the industry standard path, as they seem to be doing with the R1.
BTW - proprietary or not, there are aftermarket solutions for Tesla, so I am sure this will be the case for Rivian. The solution below has not been tested on a R1 to my knowledge. I am tempted to get one to test it, but that is a lot to spend on something that might not work.
![]()
10KW V2L Discharge Device for Tesla S/X/3/Y High-Performance Power Sup – Tlyard
My biggest concern is I have Tesla solar panels and Powerwalls already. I hope the R2 can one day interface with the Tesla equipment to give me another 88 kWh of backup...that would be huge. Tesla doesn't even offer it though except on Cybertruck so who knows.The R1 seems to mostly comply with the NEMA standard for bi-directional DC VT"x" connections.
You are correct that Rivian has not been very clear regarding the direction, but I would be very surprised if they didn't fully embrace the NEMA standard when the bi-directional VTX is released, supposedly sometime this year. There are people already using the capability with their R1 trucks.
I would be equally surprised if the R2 does not follow the NEMA standard.
For the AC interface, it may be a different story. And it would be helpful, as you said, for Rivian to explain this to us. It is reasonable to assume Rivian will continue down the industry standard path, as they seem to be doing with the R1.
BTW - proprietary or not, there are aftermarket solutions for Tesla, so I am sure this will be the case for Rivian. The solution below has not been tested on a R1 to my knowledge. I am tempted to get one to test it, but that is a lot to spend on something that might not work.
![]()
10KW V2L Discharge Device for Tesla S/X/3/Y High-Performance Power Sup – Tlyard
I am 6'1" and also felt this in the mid upper back, but I believe its something that will soften after a few months of use.I'm thinking a silly but nicely done foam insert would fit in that crevice and lessen the gap that seems to allow the top section to FEEL like it's protruding. I might mock something up for my next test drive.
Not that one SHOULD have to do this for a brand spanking new car, but i've spent my entire life already adjusting to a world designed by engineers who are CLEARLY 5'7". Im not saying EVERY car or aircraft or office seat/chair needs to have we 99% percentile examples of the upright race in mind - and they shouldn't but still, RJ HIMSELF looks to be a near cousin in size - at least from the pictures - although he COULD be surrounded by all those 5'7" engineers and designers... but still
Was it on your upper right side? I wonder if it's a mixture of height + how you drive. I tend to sit with a slight lean on my right side when I'm driving, likely because I primarily use my right hand to steer the wheel. The R1 seat is perfect and the prototype I sat in of the R2 felt the same. Just disappointed that they messed the seat up. Not great when a 15 minute drive has you feeling pain.I am 6'1" and also felt this in the mid upper back, but I believe its something that will soften after a few months of use.
Forgot to mention this earlier, but yeah, I was initially excited to see them innovate with the scroll wheels when the R2 was first unveiled. They sounded cool...but my initial impression was similar. Felt too loose and easy to input things incorrectly.Cons (I honestly was hoping there wouldnt be this many)
Scroll wheels are kind of a disaster. The pushing back towards the driver is nearly impossible without scrolling the wheel. The left and right pushes are also too stiff. I'm sure this is something you can get used to but I was not impressed.
I agree 100%, especially about the scroll wheels. After all the hype about them I was really turned off. On my R1 I can easily find the buttons on the steering wheel and activate them while in motion without looking. On the R2 this will be a challenge. I also felt like the stereo was very average and unimpressive. I came away feeling like they tried too hard to make everything possible programmable right down to the frunk release button. It's no longer a mechanical pushbutton. Now it's a capacitive sensitive button that they can program for pressure and duration of press. Maybe I'm a little old school but I feel like a plain old pushbutton works really well in some cases.Had our test drive Saturday in St. Louis.
Pros:
Car looks amazing in person.
The interior is fantastic. Very comfortable seats. Tons of room in the 2nd row. Coming from a Tesla, I love having dash information right in front of me.
The drive is really nice. Incredible acceleration for that size and a very smooth ride. Coming from a Tesla M3, it did feel like driving a tank. Being able to see all that hood in my forward view will be a switch.
The ride is very quiet on the highway
Cons (I honestly was hoping there wouldnt be this many)
Scroll wheels are kind of a disaster. The pushing back towards the driver is nearly impossible without scrolling the wheel. The left and right pushes are also too stiff. I'm sure this is something you can get used to but I was not impressed.
The software is just not intuitive. I'm sure updates will improve this, but it is clunky and too much going on (again, something I would probably get used to).
Sound is not good for a $60K car. I have been spoiled with Tesla sound, but it will need to be improved somehow through an update. Not a deal breaker though.
I too was disappointed with the R2. Perhaps my expectations were too high after driving my R1S for 2.5 years and loving it but wishing it was smaller. The R2 drives great, 10/10 IMHO but there are so many little things that bugged me, especially the audio system and the funky halo wheels, that I'm a lot less excited now and will probably keep my R1S and possibly look at other options.Was it on your upper right side? I wonder if it's a mixture of height + how you drive. I tend to sit with a slight lean on my right side when I'm driving, likely because I primarily use my right hand to steer the wheel. The R1 seat is perfect and the prototype I sat in of the R2 felt the same. Just disappointed that they messed the seat up. Not great when a 15 minute drive has you feeling pain.
This combined with my lackluster impression of the audio really made an impact on me. I'm no longer thinking of ways to get out of my R1T lease quicker (should my invite open up) and instead will keep that until the end of December and see whether the R2 improves or if I go down another path.
I'm also concerned that the R2 isn't the run away hit that a lot of the reviewers were seeming to claim. It drives great, yeah, but there's some serious drawbacks as well. I can't say the same when I got into the R1 or even when I bought the Model 3 or Y in the past.
Rivian. Please hire some good audio engineers and stop cutting costs on the sound. There's so many other things I'd cut (like the flashlight) before I'd take away from the sound system. The company seems to employ a bunch of podcast listeners or casual music fans. I'm not even asking for a crazy sound system...just one that doesn't sound thin or take away from the music.