SOLD: Custom 19" Xtrusion Overland rack + bonus Builtright Molle panel, SF Bay Area pickup ONLY,

[skunn]

Have decided to go another route for camping, and you stand to get a GREAT deal on an excellent condition. setup to go overlanding this year.

This thing is large, and fairly heavy, so local pickup ONLY in SF Bay Area (San Mateo). I'll even help you install it.

Custom Xtrusion Overland XTR1 rack, with one side AXS hinge gate, 16x11 molle plates, grab handles, and action trax mounting plates for traction boards. This sits 19" above the bed, which lies right at the roofline and is tall enough to 1) still use the rear bed camera, and 2) still open the bed tire door. The powder coating is in excellent shape. The only thing worse for wear is the button to open the gear tunnel as its starting to degrade. I have replacements from Xtrusion en route. I will include a ton of screws and drop-in T-nuts. Will include roof top tent mounting brackets as well.

As a bonus, I'll throw in a used Builtright Industries bulkhead molle panel and a set of Rivian OEM All-weather mats (black Rivian logo, not yellow)

The Xtrusion setup alone cost me $2700 and a 3 month wait.

Yours for $1500, again local pickup ONLY

Sponsored

 

[Singletracker]

Folks, this is a very good deal. I have the 19” XO rack on my R1T and love it.

 

[whizzkidd]

A fellow Bay Area AirCruiser

 

[PhatDaddy]

A great deal! Wish I was local!

 

[skunn]

Folks, this is a very good deal. I have the 19” XO rack on my R1T and love it.

I think it can't be beat if you want a RTT on an R1T! As I get to warranty expiration, trading for a S

 

[LNL_HUTZ]

Does it go into the crossbar mounts? I can't tell from the pictures how it's attached to the truck.

 

[skunn]

Does it go into the crossbar mounts? I can't tell from the pictures how it's attached to the truck.

Thats exactly right. How it is installed is demonstrated on their youtube video here:

 

[skunn]

Rivian All Weather mats added to sweeten the deal.

 

[Soju1]

To covert this to the low height is it just getting new towers from xtrusion?

 

[skunn]

To covert this to the low height is it just getting new towers from xtrusion?

No, the angles are fixed at the points that go to the top of the bed and top of the rack I believe, so the pieces across would have to be longer as well the pillars shorter.

 

[sacramentoelectric]

I had one of these racks and they're awesome. Not having to put it together yourself is a huge bonus. Great price too. I only got rid of mine because I switched to a GFC.

 

[Soju1]

im interested, but im checking with xtrusion what it would take and cost to change height. I'd want both options depending on the type of camping im doing. Dont need the builtright panel or the floor mats since i have one already. are you interesed in OEM cross bars (silver) + cash?

 

[skunn]

im interested, but im checking with xtrusion what it would take and cost to change height. I'd want both options depending on the type of camping im doing. Dont need the builtright panel or the floor mats since i have one already. are you interesed in OEM cross bars (silver) + cash?

Tbh I’d caution against any idea of changing the height regularly. While not technically difficult to build this from all of its components, it does take a fair amount of time.

no need for cross bars ok my end

 

[sacramentoelectric]

im interested, but im checking with xtrusion what it would take and cost to change height. I'd want both options depending on the type of camping im doing. Dont need the builtright panel or the floor mats since i have one already. are you interesed in OEM cross bars (silver) + cash?

I changed the height of mine once. They sell a kit and it’s not too expensive. Not something you’re going to want to do more than once. It’s a pain.

 

[Hill]

Interested

Sponsored