Are there any products you need for the Rivian and nobody made yet?

[BestEvMod(AOSK)]

How about a plush "comfort backrest" for the Rivian seats, which fills the seat gap by the shoulders? You could sell them in pairs. I think most owners agree that the seats aren't very comfortable and that is one thing that needs improvement.

https://www.rivianforums.com/forum/threads/rivian-seat-fix-for-tall-guys-sort-of.19134/

indeed, there are quite many owners share the same feeling, i will bring it to the team immediately.

Sponsored

 

[BestEvMod(AOSK)]

I've needed an extension of the hard plastic top cover for the upper part of the tailgate. This part seems to dent easily and I've already got some dings from fallen tree debris.

This company makes a (let's say...interesting...) spoiler for the tailgate, but I'd be looking for basically just a cover that protects this upper section of the tailgate from damage and to make it easier/safer to grip and close the tailgate.

example: https://extremeonlinestore.com/prod...es-matte-black-rear-tailgate-lid-wing-spoiler

this seems like an easy job, we could use the PMMA material we use on the rain guard and hood deflector to make one.
does anyone else share the same need?

 

[BestEvMod(AOSK)]

2nd row cupholders. Have now twice found ourselves with the middle seat occupied (passenger or dog crate) and the 2nd row passengers have no cupholder. I don't even have a suggestion on where to put one but maybe like this contraption but cupholders instead? https://www.evbase.com/products/rivian-r1t-r1s-under-seat-storage-box-rear-seat-organizer-back-seat-tray?currency=USD&utm_medium=cpc&utm_source=google&utm_campaign=Google Shopping&stkn=d6c163adff3e&gclid=CjwKCAjwgsqoBhBNEiwAwe5w06nK1-qL7YcLRO3rFksAwTbje35XjrtMThRjvRO_poXskldQV68DRBoC1nAQAvD_BwE&variant=43838794694899

anyone else share the same need?

 

[BestEvMod(AOSK)]

1) Lower tailgate 2 piece cover/liner

2) 2nd and 3rd row seat back protector/liner that can be used folded or up

3) Step cover to fit over the cargo area between the 3rd row and flat cargo area (can be a part of 3rd row seat back protector)

we had some rough designs on this. and waiting to see how the feedback on our 3-row-only bottom trunk mat goes. and decide it we shall make a full set(two pieces on seat back, one piece oh the step cover, two pieces on tailgate.)

 

[BestEvMod(AOSK)]

i don't know if it's possible, but maybe a replacement front and rear camera for better quality? the sides and eagle 360 view don't really matter much to me.

this might be out of our expertise.

 

[BestEvMod(AOSK)]

+1

Unbelievable that nobody offers a two piece shade kit for both sections of the R1S roof glass.

the reason why is that the rear piece is soooo tricky. we been working on it for a couple months now.

 

[BestEvMod(AOSK)]

thank you so much for everyone sharing your valuable thoughts.

 

[Donald Stanfield]

we actually discussed something like this in our development meeting. but we concern heat dissipation might be an issue. and the molding cost was about 150,000$.

And thats why there aren't a ton of gear tunnel shuttles on the market. Big development cost to get something reliable that fits well. Rivian themselves probably realized that so they put development on the back burner.

 

[Donald Stanfield]

this seems like an easy job, we could use the PMMA material we use on the rain guard and hood deflector to make one.
does anyone else share the same need?

Depends on how it looks TBH. If it looks good then yeah having that area protected would be welcome. I have it PPFed right now but that won't stop anything too rough.

 

[Byrd]

this seems like an easy job, we could use the PMMA material we use on the rain guard and hood deflector to make one.
does anyone else share the same need?

@BestEvMod(AOSK) yes please

 

[VikingMD]

A nice surround for the hitch opening after the cover is removed that allows the hitch and plug to be used. Having the cover off looks unfinished but replacing the cover all the time is a pain in the backside.

 

[godfodder0901]

@BestEvMod(AOSK) How about something to block the gap between the front seats and the center console? You know, the hole where things never return from? It would be nice if it were just at the base of the seat mount on the floor so that it wouldn't impede the movement of the seat.

 

[TexasBob]

something to solve this that does not ruin the aesthetic
https://www.rivianforums.com/forum/threads/rivian-seat-fix-for-tall-guys-sort-of.19134/#post-398417

 

[shrink]

@BestEvMod(AOSK) How about something to block the gap between the front seats and the center console? You know, the hole where things never return from? It would be nice if it were just at the base of the seat mount on the floor so that it wouldn't impede the movement of the seat.

There's already a pretty good solution for that. I have them in both of my Rivians - one with Ocean Coast and the other with Forest Edge. No one knows they're there:

https://www.amazon.com/dp/B00BYH6C1E?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

[godfodder0901]

There's already a pretty good solution for that. I have them in both of my Rivians - one with Ocean Coast and the other with Forest Edge. No one knows they're there:

https://www.amazon.com/dp/B00BYH6C1E?psc=1&ref=ppx_yo2ov_dt_b_product_details

Yeah, I've seen those. I'm looking for something that doesn't move with the seat and create an additional wear point.

Sponsored