OP
OP
Yossarian
Well-Known Member
- Joined
- Oct 20, 2020
- Threads
- 45
- Messages
- 934
- Reaction score
- 922
- Location
- SE Pennsylvania
- Vehicles
- R1T,Telluride, Wee-Strom, Lynskey Cooper
- Thread starter
- #31
Update: While I was leaning toward the Grizzl-E, after some additional research, I decided to order the Emporia.
Bth units get good reviews, but I plan to hardwire the EVSE, and the Emporia has the edge in that as wiring can be connected directly to the bus. The power connection in the Grizzl-E is designed to be used with lugs, which is fine, but apparently the connections are small, and most lugs sized for 6 AWG will not fit, forcing you to either grind them down (not recommended) or finding ones that wll fit.
Again, thanks to all for the advice.
Bth units get good reviews, but I plan to hardwire the EVSE, and the Emporia has the edge in that as wiring can be connected directly to the bus. The power connection in the Grizzl-E is designed to be used with lugs, which is fine, but apparently the connections are small, and most lugs sized for 6 AWG will not fit, forcing you to either grind them down (not recommended) or finding ones that wll fit.
Again, thanks to all for the advice.
Sponsored
Last edited:
