Vehicle(s): 2025 R1S Gen-2, ~1,600 mi, 22” wheels. Dealer loaner (almost new) had the same noise.
Symptom: Small-bump rattle that I can feel in the steering wheel (and lightly in the floor) at ~11–14 mph on slightly rough paved roads / lane dots. Oddly, it’s quiet on continuous rough roads...
Hi everyone,
I have a Gen 2 R1T, around 5K miles. The last few days there has been a 1 second rattle under the hood, followed by a 6-7 second pause, then the cycle starts over.
There are no warnings displayed and the vehicle runs perfectly.
The rattling cycle used to stop 2-3 minutes after...
Hi everyone,
I have a Gen 2 R1T, around 5K miles. The last few days there has been a 1 second rattle under the hood, followed by a 6-7 second pause, then the cycle starts over.
There are no warnings displayed and the vehicle runs perfectly.
The rattling cycle used to stop 2-3 minutes after...
I’ve seen a few posts about this Geiger counter sounding rattle coming from an R1S B pillar or rear door. I’ve got this happening on my passenger side. Super annoying and desperate to find a solution.
I saw the post saying to add felt tape between the door trim and metal of the door. Worked for...
Hi All, just picked up my R1T last Friday and 98% happy. Glad I found this forum also. The 2% unhappy comes two things 1) from rattling in the dash which I’m reading seems to be a common issue and 2) something like a screw or tic tac sized item seems to be rolling around passenger side where...
About a week ago a rattle started in our R1S (delivered in December). Mostly occurs when going over road bumps but occasionally the slightest road imperfection. It sounds like it’s coming from the large speaker cover in front of the Driver and Passenger (specifically in the area closest to the...
My passenger seat was ticking away when unoccupied. SC re-tourqed bolts but it didn't help. Investigated on my own and found the sound was coming from what appears to be a metal/rubber/metal damper or bushing under the seat. I applied some WURTH HHS Plus lubricant and the noise has been gone for...