Sponsored

Search results

  1. Leonbmx

    Morimoto XB boost bar reverse light wiring

    So I got the light in the other day and I just now jerry rigged it with a 9v battery, to test the camera wash out as described above. Upon installing the light it became immediately apparent that it wont fit in the intended orientation, as our camera is in the way for that, so the alternate...
  2. Leonbmx

    Morimoto XB boost bar reverse light wiring

    Interesting, I had not thought about that. I suppose I can give it a shot anyway and otherwise try and mount it on the bottom of the license plate.
  3. Leonbmx

    Morimoto XB boost bar reverse light wiring

    I recently came across this backup (reverse) light bar from Morimoto: https://www.morimotohid.com/Morimoto-XB-Backup-Light-Boost-Bar?quantity=1 I bought one and while it is on the way, I was wondering if anyone has played around with the reverse lights and their wiring yet? I looked at the...
  4. Leonbmx

    Installed: EV Sportline R1000 wheels and Nokian Hakkapeliitta LT3 winter tires

    Looks good! So I got the LT3's as well, but on the OEM 20". Since they are the same tire size as the OEM AT 20" are you guys inflating them to 48PSI, or something different?
  5. Leonbmx

    Grill Mounted Light Brackets for LED pods with Trigger 4Plus wireless controller

    @skookum950s I PM-ed you, Iā€™d love to come check them out in person.
  6. Leonbmx

    Grill Mounted Light Brackets for LED pods with Trigger 4Plus wireless controller

    Nicely done! I especially like the 3D printed mount with, what looks like "swivel fingers" so you can install it "blind" and don't have to worry about dropping nuts and washers behind the grill. And I am with Matt, if you decide to sell them, I am interested!
  7. Leonbmx

    Washington GC Washer Fluid Group Buy - IT'S ON

    That is a fair point. The product in the link does say ā€œconcentrateā€, so that sounds promising?
  8. Leonbmx

    Washington GC Washer Fluid Group Buy - IT'S ON

    Awesome!! Iā€™m still down for a case. Ready to Venmo or equivalent.
  9. Leonbmx

    Rivian R1T No Drill Fridge Slide DIY Installation Walkthrough

    Awesome! Very similar to what I did, but I am totally going to try to incorporate some hinges! (https://www.rivianforums.com/forum/threads/my-tuff-stuff-fridge-slide-out-setup-in-r1t-bed.10266/ )
  10. Leonbmx

    Dear Rivian Engineers who worked on the Air Conditioning

    So, last weekend I was doing some errands, it was upper 80's outside and I had the pup in the back, so I set the AC to "LO" and did hear some more noise than usual from the front, but I figured that was normal, as I had never used "LO" before. Everything was working fine otherwise, cabin got...
  11. Leonbmx

    Introducing the first Rivian specific bottle jack! Team 1EV 6 Ton Bottle Jack Kit for R1T / R1S

    So, aside from mansplaining to me how to change a tire in the boonies, essentially you are telling us that the OEM is only outlining a procedure to cover their asses and there is no technical reason for us to follow said procedure. Admittedly, I have not tried this, so you may be 100% correct...
  12. Leonbmx

    Introducing the first Rivian specific bottle jack! Team 1EV 6 Ton Bottle Jack Kit for R1T / R1S

    So I had a chance to use the bottle Jack in the wild today on a flat rear tire. We had the truck in, the Rivian recommended, off road high and with the way the truck was angled, there was no way to get the included tall extension on the Jack, so we had to use one of my megawatt pucks, which...
  13. Leonbmx

    Nokian recommended tires (including winter snow tires)

    So I am looking for winter tires for the upcoming season and the LT3's were the ones I thought I was looking for, as far as what I had been reading on the various Rivian places. But it sounds from this thread that the R5's are the go to Nokian's?
  14. Leonbmx

    Introducing RMaxx Running Boards & Rock Sliders for Rivian R1T / R1S from Team 1EV

    Fair points. I guess Iā€™ll just patiently wait till my order (#2008) is up, which I imagine isnā€™t much longer now. While we are on the topic of jacking points, has anyone tried to use a hi-lift type Jack in conjunction with the sliders?
  15. Leonbmx

    Introducing RMaxx Running Boards & Rock Sliders for Rivian R1T / R1S from Team 1EV

    So at this point there are ~25 Sliders in the wild? I have not seen any of them show up on YouTube to be reviewed? Did they not go out to any of the ā€œpopularā€ people on there?
  16. Leonbmx

    Thuren wheels + 35" inch Falken Wildpeak R/T tires on Glacier White R1S

    This looks amazing!! So, If I were to copy this setup on my R1T, I would likely need to buy 5 wheels, right? As the OEM spare 20" is a different outside diameter, so at that point it would be useless as a spare? Although with the quad motors, nothing is physically connected like "normal" AWD...
  17. Leonbmx

    Introducing the first Rivian specific bottle jack! Team 1EV 6 Ton Bottle Jack Kit for R1T / R1S

    People who have these, how do you use it on the rear? Even with an ARB base like this, which adds 1.4" the rear wheel is barely off the ground? I had planned to go to 35's, but I guess I'd need to rethink my off road jack solution in that case. I do have the spare tire, so I wonder if the OEM...
  18. Leonbmx

    Washington GC Washer Fluid Group Buy - IT'S ON

    Holy sheet! This started in February and is still ongoing? I feel like the aftermarket businesses have been instructed by Rivian to keep us waiting and tell us that we are all to receive whatever it is that we are ordering "s00n" That said, FOMO is king... sign me up for 4 gallon
  19. Leonbmx

    Introducing RMaxx Running Boards & Rock Sliders for Rivian R1T / R1S from Team 1EV

    Ohhhh, so we may see some sliders in the wild soon! Talking to a few people with different vins (9k, 10k and 15k) it seems like Rivian did some revising on the mounting points, as demonstrated by the fact that electruck4x4 had to redesign their sliders to accommodate. Is your design of the...


Top