Search results

Yes it has. The central mechanical section is 2mm thick aluminum for better heat dissipation, there are dual fans in that section also--one for the condenser and an additional fan for the compressor, additionally it is a two compartment super insulated cooler box with another two fans for air...

I think you understood, but just to be clear, it would take another $25k to $30k from reservations in addition to the $25k I put in. The reservation amount would vary based on how many reservations there were. For example; $30,000 / 100 reservations = a $300 reservation fee or $30,000 / 200...

The handle actually is designed to be wide enough for a 2 x 4 to make it easier for those of us North of 50 to easily and safely load it if needed. Speaking of being North of 50. I'm not all that great with the whole social media thing so any help form from you guys more comfortable with Redit...

Yeah try TWO Chows at the beach. It's like four dogs worth of hair full of sand and salt water. Kidding aside there are lots of little things on a daily basis that you would never think of where having 12 gallons and a sprayer come in handy. It also takes up space that is essentially wasted...

People are already using electric coolers in the frunk without issue: https://www.rivianforums.com/forum/threads/vehicle-fridge-temperature-impact-in-frunk.5074/

I originally thought I would get more use out of the cooler but the more I thought about it the more useful the water tanks sounds. You can rinse off gear, bikes, boots, or the dogs when you go on hikes or in our case the beach. Water storage for emergency situations--we get hurricanes here in...

Sure it is no problem switching the fill to the other side and I agree that probably makes more sense. I had put it on the drivers side out of habit because the water fill on most RV's is on the Drivers side. My thinking being it would be easier to refill if you were at an R.V park.

I appreciate your sharing your experience. From what I have read it's 5% plus CC as you mentioned which is typically another 5%. Basically I am willing to put $25k into this out of my own pocket IF there are enough people who want to reserve at somewhere between $150 and $300. The reservation...

What a great idea! Yes it should be possible and if it is I will. Also, the machined aluminum handles have pass-thru holes for 1/4" (6mm) rope for for superior tie-down and transport capabilities. Image below.

I would be curious as to why. I live in South Texas where we have two seasons; Summer and the other Summer, so I am used to high temperatures. In my experience, if the cooler is of good quality with an airtight seal, at least 25mm of polyurethane poured in place foam insulation, and a...

I really like the sound of that. If we end up with enough interest to move into production would you be available to discuss space requirements, orientation, accessibility etc.?

If it's an overly hot day--over 90 F--and you're stationary at your campsite you can crack the frunk open a few inches and let hot air rise out. You are going to have to open the frunk anyway to get into the cooler. I linked to that specific poster because he took the time to field test AND...

I don't dispute any of that--as mentioned I love tech. I also considered including WIFI/BT capability as an unsupported open source option for people to tinker with. I still believe that this would fall squarely into the cool but essentially worthless tech category. As my wife pointed out...

Rivian owners have already been running electric coolers without issue: https://www.rivianforums.com/forum/threads/vehicle-fridge-temperature-impact-in-frunk.5074/

The water tank is designed specifically to fit the space under the frunk shelf. Capacity is 12 gal nominal--actual capacity is closer to 12.5 gal but the pump can't drain the tank 100% Wall thickness is 3mm (1/8th inch) There are two molded in handles for easy transport. The tank is baffled to...

As a mechanical engineer and part designer you are uniquely qualified to know just how much I appreciate that offer. Thanks =)

The water tank is optional and sold as a separate product. The cooler has provisions for optional positioning cleats that can be used either on your frunk shelf or on the water tank. See images below. We were considering a body color matched option--maybe as a first run perk similar to Launch...

I think people don't get that the frunk tub itself is uninsulated and the underside IS exposed to moving air so it acts like a big heat sink. Then they assume the cooler will run non stop like their A/C which it doesn't because the cooler IS an air tight super insulated box. You are correct...

Thank you for the kind words. If you--or anyone else--are interested in the criteria I based my design choices on I can either make a "design deep dive" post or maybe link a pdf. Pretty dry stuff to be candid but if you are into design it might be interesting.

Thanks much for posting this.