Sponsored

12v cooler that fits in Gear Tunnel with slide?

TahoeTexan

Active Member
Joined
Jun 5, 2025
Threads
5
Messages
26
Reaction score
6
Location
Reno, NV
Vehicles
'22 Ford Bronco, '19 VW eGolf
I'm looking for a 12v cooler that will fit in the gear tunnel with an EVBase gear slide. Most of the smaller 16-20 liter coolers are 12.5" or wider, and don't fit without tilting.

I did find one from Setpower that is an armrest fridge about 9.5" wide and will problem fit.

Any other options?
Sponsored

 

Cycliste

Well-Known Member
First Name
Scott
Joined
Jul 7, 2023
Threads
11
Messages
1,192
Reaction score
1,675
Location
Solano County, California
Vehicles
2023 R1T/20AT Brights, BMC TMR01/SRAM AXS/454 NSW
Occupation
Amateur aero weenie
Clubs
 
I prefer a Dometic CFX 35 in the truck bed near the tailgate and a separate 1 kWh battery. It fits under the tonneau cover. I lash the fridge to the cargo point
 
OP
OP

TahoeTexan

Active Member
Joined
Jun 5, 2025
Threads
5
Messages
26
Reaction score
6
Location
Reno, NV
Vehicles
'22 Ford Bronco, '19 VW eGolf
I have an Iceco 35L for the bed. I'd like a smaller option for shorter trips and access from the cabin.
 

Funhiker2022

Member
Joined
Feb 12, 2023
Threads
0
Messages
17
Reaction score
18
Location
Seattle, Washington
Vehicles
Tesla 2021 model 3
Clubs
 
OP already mentioned, but I have the Setpower AB15 (https://www.amazon.com/dp/B0CPL6XS8W). It fits in the footwell behind driver seat and also can be put into the gear tunnel. It's small, but enough size for 10+ cans or some small containers. I confirm it'll get cold and keep your ice cream deliveries frozen as well.

If you get the Setpower,also get some Seal Foam Tape,1/4 Inch W x 1/16 Inch T Weather Stripping to improve the lid seal so it closes tightly. (https://www.amazon.com/dp/B09LHJ66HQ)
 

CharonPDX

Well-Known Member
First Name
Charon
Joined
Jul 12, 2021
Threads
31
Messages
2,526
Reaction score
4,218
Location
Cascadia
Vehicles
'22 R1T LE, '16 Model S, '19 Arcimoto FUV
Occupation
InfoSec Geek
Clubs
 
I got one of these from Amazon a few years ago, although it looks like it isn't available any more. It should *JUST* fit on a sled.
 

Sponsored

Gurule92

Well-Known Member
Joined
Jun 4, 2024
Threads
43
Messages
422
Reaction score
482
Location
Colorado
Vehicles
19 Tesla Model X Raven & 22 R1T, Adventure, QM, Glacier White.
Occupation
Cyber Stuff
OP
OP

TahoeTexan

Active Member
Joined
Jun 5, 2025
Threads
5
Messages
26
Reaction score
6
Location
Reno, NV
Vehicles
'22 Ford Bronco, '19 VW eGolf
I got one of these from Amazon a few years ago, although it looks like it isn't available any more. It should *JUST* fit on a sled.
That's pretty much the "standard" width of most smaller fridges, 12.6" and it will have to be tilted. I wish it fit as it's a perfect size for shorter trips.
 

CharonPDX

Well-Known Member
First Name
Charon
Joined
Jul 12, 2021
Threads
31
Messages
2,526
Reaction score
4,218
Location
Cascadia
Vehicles
'22 R1T LE, '16 Model S, '19 Arcimoto FUV
Occupation
InfoSec Geek
Clubs
 
Definitely needs tilting to get through the gear tunnel door opening, but once in, it fits "upright" just fine, and can be accessible through the rear seat access hatch. (In fact, I put things under it to boost it up to be easier to reach, which is why I'm assuming it should fit on a slide.)

They make/made different sizes, this one is a "shorter in height" one.
Sponsored

 
 








Top