Leonbmx
Well-Known Member
- Joined
- Jan 28, 2022
- Threads
- 4
- Messages
- 134
- Reaction score
- 132
- Location
- Seattle, WA
- Vehicles
- 2022 Rivian R1T, 2020 Tesla MY
- Occupation
- Boeing Design Engineer
I did the exact same thing as the OP, Countersunk M6x30 is what you need.Let's try that again... @rivian_panda
You could use a 30mm long protruding head (domed, button head, whatever you want to call it) fastener as well, but it will limit your positions that you can attach the tie downs, as they need a flush surface, which is what the countersunk fasteners provide.
You'll need something like this: Countersinking Drill Bit Set
Sponsored
Last edited: