Sponsored

Search results

Search the forum Search RivianForums - WP
  1. redantpile

    R1 AC Noise

    There are several post on this. The compressor can spin up way too fast in my opinion. https://www.rivianforums.com/forum/threads/i-thought-evs-were-supposed-to-be-quite-rj-are-you-hearing-this-this-car-sounds-like-its-gonna-hit-mach-9-when-you-switch-on-the-ac.16205/ And the compressor is...
  2. redantpile

    R1S Subwoofer Upgrade failure - HELP!

    Agree with the previous post. I would check the 12 volts to see if it's low, and also disconnect power to the amp to see if it changes the errors or voltage. I have been running JD250/1 for months with no issues but that's lower power than yours. You might also make sure that the amp turns off...
  3. redantpile

    Rodent chewed through wire harness, causing $7K repair (and $1650 towing)

    I have two just to be safe. One home version up against the garage in front of the R1. The second is the 12 volt engine mount, but I mounted it on the ground facing up. If you install it in the vehicle I would think you would need at least two. Both mounted around the motors. I guessing that's...
  4. redantpile

    Rodent attack...now what?

    I park on the driveway and have had rodent damage in my Tundra. Now I have both of these on the driveway. One goes in the engine compartment, but I have it sitting on the pavement facing up, under the R1. The other is by the garage door. I installed the engine version in both of the previous...
  5. redantpile

    Front license plate holder removal?

    Not sure about a factory install. This is my low profile install and the thread has several other installs. https://www.rivianforums.com/forum/threads/front-license-plate-mount-that-looks-good-and-high-quality.11888/page-5#post-367826
  6. redantpile

    2/16: Georgia Factory Drone Video

    The sign says "We oppose No Rivian assembly plant". I'm glad they are for it. :)
  7. redantpile

    Petition NHTSA OTA software recall vs hardware recall language

    FYI if you want to sign. If you are not familiar with this issue, the media sends out stories about recalls(OTA) making it sound as if thousands/millions of vehicles need to be repaired because of a recall. So you might think that the company will have to spend whatever millions of dollars to...
  8. redantpile

    "Alexa, let's chat" a la KITT

    I want the light moving left to right on the front bar. You can choose KITT or the Cylons or inspiration.
  9. redantpile

    Completed Speaker & Sub Upgrade in Rivian R1S

    @Tbey That's awesome. 5 channel amp, replacing 4 doors and the sub is what I thought of doing as worst case scenario. I'm guessing they ran a 80 amp line to the battery. Curious to see if you have any 12 volt issues with that. Dead battery etc...
  10. redantpile

    R1S Subwoofer removal, vibration rattle fix and pics

    What do you mean by "enclosure was not mounted at the diagonal point"? Our vehicles might be different if they changed something in the factory. Mine is a 10,xxx vin number. The vent was just remove a nut and then wrestle it out. You have to bend and pull it. I may have been able to remove the...
  11. redantpile

    Teardown: R1S Audio Unit under drivers seat and speaker harness pinnout.

    It's a digital buss type system as far as I know. Like A2B. It saves weight and other advantages. There are some adapters out there, but they are specific to each vehicle. Like this one. https://navtv.com/products/NTV-KIT873/zen-a2b.html
  12. redantpile

    Teardown: R1S Audio Unit under drivers seat and speaker harness pinnout.

    The sub is dual voice coil so both pairs are speaker level out. I think they are mono but I used all four as input to my amp.
  13. redantpile

    Adjusting headlight beam angle

    So did you turn counter clockwise to go down? The image seems opposite of what it does. I turn mine to the left-counter clockwise-towards the U and the light moves further down. I are confused.
  14. redantpile

    Knocking noise in the rear of quad motor R1S after parking

    I don't use kneel very often on mine. I wonder if the rear clutch might make some noise. I might play with conserve mode a little to see if does anything. Just a guess. Mine makes the noise maybe 1/3 rd of my drives.
  15. redantpile

    Knocking noise in the rear of quad motor R1S after parking

    Yes. Mine has done that from the beginning. It's usually when I'm driving into/out of the driveway, and it does it when parked occasionally. Kinda sounds like tapping on a small pot, or a cowbell with a sock in it. I will just ignore it until something breaks I guess. I would like to know what...
  16. redantpile

    Advance Bluetooth Playback

    I also had similar results. Same AAC codec, bit rate etc... I think I had album art working on one device I tried but also had inaccurate track listings shown on the screen. As far as using BT audio I do have a decent setup now. I'm using my old LG phone as a dedicated music player for the R1...
  17. redantpile

    20' coiled hose to replace factory air hose

    Polyurethane hose is the way to go. Nice and lite. I have been very happy with those in my shop/garage as apposed to traditional heavy hoses.
  18. redantpile

    Aluminum Key Fobs, Aluminum iPad Holders, Key Stickers Oh My!

    Here is one option. https://www.amazon.com/dp/B0CDGWMJLN?ref=ppx_yo2ov_dt_b_product_details&th=1
  19. redantpile

    Aluminum Key Fobs, Aluminum iPad Holders, Key Stickers Oh My!

    It looks like a good products and I'm fine with no logo. The issue is the buttons. You can't make them out very well in low light. That's why so many people have been painting them. I like that the large hook is gone.
  20. redantpile

    Aluminum Key Fobs, Aluminum iPad Holders, Key Stickers Oh My!

    I second that. If the icons stand out, I would buy one.


Top