Search results

Yes! We will be releasing roof rack with narrower crossbars in the coming months There are no locks on the rack. We use standard bolts for attaching, but they could easily be swapped for tamper proof torx bolts if desired. There's no beating ease of use for the locking mechanisms/removal on...

Hello! We are pumped to release our latest product, the Titus crossbars! We wanted to offer a more cost effective rack system without sacrificing strength or quality. This rack uses the same extremely strong 3" X 1.5" extrusion crossbars found on all of our Rivian products. Utilizing powder...

Labor day sale on our gear tunnel slide, 20% off!! https://range-industries.com/products/r1t-gear-tunnel-slide

Great info in this thread everyone! We are running a labor day sale on our slide right now, 20% off https://range-industries.com/products/r1t-gear-tunnel-slide

Hey guys we are running a labor day sale on our slide 20% off!! https://range-industries.com/products/r1t-gear-tunnel-slide?variant=41877855207633

15% off sitewide! Use code RIBF2023 at checkout. SHOP R1T

We are starting to get some accessories wrapped up for the slide! Dividers now available! https://range-industries.com/products/r1t-gear-tunnel-slide-tray-divider

Yes! Its not the most accessible space, but its does have 3" of space between floor and slide that could be used for storage. On the lost space in the tunnel, we removed one of the end caps so you can get better idea of the profile. The center slide sits less than 1" above the tunnel door...

We are going to have a few different mounting brackets that will attach to the T-slot, should have them on the site in the next couple weeks.

60" Long, the flat base is 7.75" wide X 2" deep- with the sheet metal is around 14" wide to base of the slant. You lose about 4" from the floor of tunnel to the floor of the slide. See below and let me know if you guys want any more info on dims. Yes! We are working on some basic items like...

Correct, it is just a one way slide.

We will be shipping these with the main base assembly complete, but leaving off the angled sheet metal sides and end caps. The sheet metal and end caps can be swapped to either side/end, so customer can choose what orientation they want. You can always change it down the road, but will need to...

Thanks! The R1S is next on the list! We are still wrapping up a few more things for the R1T, then will start on R1S. Hoping to have something by end of the year for you guys.

85 lbs EDIT: To clarify, the slide weighs 85lbs. The capacity is 200lbs.

RANGE INDUSTRIES-RIVIAN R1T GEAR TUNNEL SLIDE We are excited to share our newest R1T product-A gear tunnel slide you actually can buy! Check it out and let us know what you think! 100% bolt in-No modifications required 200lb weight capacity(evenly distributed) Modular design-T slot extrusion...

For all of our R1T racks we use 303 stainless steel u-nuts to interface with the factory crossbar points. We tried a number of different attachment methods but ultimately decided we wanted to prioritize strength and stability over mounting speed. Rivians factory crossbars are very slick with how...

Thanks for the shout out. We're excited to be bringing some options to the table for R1T owners.