Dark-Fx
Well-Known Member
Seems like it would be trivial to re-add it. Won't be OEM but if you actually need to use it, that hardly matters.VIN 11919 and no 12V outlet. But I do have some good news... the wiring is there. It's bundled with the right LED frunk light. Looks like whatever connector they used was cut off (or yanked off, as bare copper strands were exposed) and "protected" with electrical tape. Probably the most shotty work I've seen in a brand new (modern) car
Anyway, here are some photos showing available wiring. This is good for us without the 12V outlet, as we can now use something like this or this, and mount as it was from the factory, or mount it on the frunk tub vertically.
PHOTOS
Sponsored